Cherish
Cherish
Engineered to international standards with certified dynamic load validation, robust dual-cylinder balance, and tailored floor anchors.
Maximizing bay throughput begins with precise structural integration. A 2-post lift requires exact ceiling clearances, anchor-bolt pullout tolerances, and perimeter buffer calculations.
| Specification Metric | Clear-Floor Symmetric (4.0T - 4.5T) | Asymmetric Overhead Beam (4.0T) | Base-Plate / Low Ceiling Design | Commercial EV Fleet Heavy Duty (5.0T+) |
|---|---|---|---|---|
| Overall Height Clearance | 3,650 mm - 3,900 mm | 3,700 mm - 4,200 mm | 2,820 mm - 2,900 mm | 4,450 mm - 5,000 mm |
| Overall Outer Width | 3,420 mm | 3,450 mm | 3,380 mm | 3,700 mm - 3,900 mm |
| Drive-Through Width | 2,500 mm - 2,600 mm | 2,560 mm (Angle-oriented) | 2,450 mm | 2,850 mm - 3,000 mm |
| Lifting Stroke & Pad Height | 1,900 mm / Min 90 mm | 1,950 mm / Min 100 mm | 1,850 mm / Min 110 mm | 2,050 mm / Min 120 mm |
| Concrete Slab Requirement | C20/25 Concrete, min 150 mm | C25/30 Concrete, min 180 mm | C20/25 Concrete, min 150 mm | C30/37 Rebar-reinforced, min 250 mm |
Structural envelope optimization requires a minimum 650 mm side clearance from post to adjacent bay walls, and at least 1,200 mm front/rear egress paths. When positioning asymmetric arms for high-voltage Electric Vehicles (EVs), the layout must accommodate skateboard battery chassis pickups without impinging on structural lift arm travel arcs or underbody cooling pathways.
Overhead configurations direct structural hydraulic conduits overhead, eliminating ground obstacles for oil drains and transmission jacks. Floor-plate designs bridge the columns across the slab, making them mandatory for low-ceiling retrofits.
Asymmetric layouts orient columns rotated at 30 degrees, placing approximately 30% of the vehicle load behind the post and 70% forward. This matches modern front-wheel and mid-engine vehicle centers of gravity while allowing unrestricted cabin door access.
Each column exerts both dynamic moment forces and tensile shear stress. Standard M18x150 anchor expansion bolts require a minimum 3,000 PSI uncracked concrete depth to neutralize dynamic tilting torque under load testing up to 150% rated capacity.
Cherish, a leading enterprise dedicated to providing high-quality equipment and solutions to global customers, has journeyed through 15 years since its inception. We have always adhered to the core values of "integrity, innovation, quality, and service," focusing on the research, development, manufacturing, and sales of car parking equipment, wastewater treatment equipment, and fully automatic spray coating equipment, aiming to create greater value for our customers.
Car Parking Equipment: We offer a variety of parking solutions, including mechanical parking systems and intelligent parking systems, catering to different parking scenarios. Our products are renowned for their safety, reliability, user-friendly operation, and space-saving features, effectively alleviating urban parking challenges.
Wastewater Treatment Equipment: We are committed to providing efficient and energy-saving wastewater treatment solutions for industrial and municipal sectors, including integrated wastewater treatment systems, MBR membrane bioreactors, and sludge dewatering equipment, contributing to environmental protection.
Fully Automatic Spray Coating Equipment: We supply automated spray coating production lines and powder recovery systems, widely used in industries such as automotive, home appliances, building materials, and mechanical equipment, offering customers efficient and eco-friendly metal surface treatment solutions.
Explore real-world industrial deployments manufactured across our smart production base, featuring automated vertical staging, industrial coating, and wastewater ecosystems.
Engineered for high-density vertical vehicle holding, tripling baseline lot capacity with balanced hydraulic lifting.
PLC-controlled automated matrix parking, delivering fast retrieval cycles for modern multi-tier civic facilities.
High-efficiency electrostatic spray application system with thermal curing tunnels and automated powder recycling.
Environmental management systems leveraging modern bioreactor units to guarantee industrial effluent compliance.
Cherish leverages end-to-end automated manufacturing protocols to guarantee dimensional tolerances within ±0.5 mm on high-tensile column plates, robotic arm assemblies, and laser-guided hydraulic cylinder honed tubes.
Constructed using ultra-durable Q345B structural steel plates. Our column channels withstand extreme bending torsional moments without permanent deflection over 100,000 continuous operating cycles.
Each steel component is shot-blasted to SA2.5 specification, followed by integrated electrostatic powder coating or zinc phosphatizing to deliver 1,000+ hours of continuous salt-spray rust protection.
Engineered for high-density shipping economics. Lift components are secured on modular steel shipping skids, preventing maritime transit friction damage and lowering shipping cube costs by 22%.
Navigating strict occupational safety requirements across diverse regulatory jurisdictions around the globe.
Fulfills European Machinery Directive 2006/42/EC standards. Incorporates dual-redundancy hydraulic parachute valves, automatic mechanical tooth catches engaging at 50 mm intervals, and dead-man electro-hydraulic down controls.
Built to satisfy structural stability demands with synchronized aircraft-grade equalizing steel cables, high-impact rubber door-stop shields, and factory certified test certificates up to dynamic yield limits.
Complete project support comprising tailored foundation rebar drawings, localized multi-voltage industrial hydraulic pumps (208V, 230V, 380V, 415V), and detailed, step-by-step CAD architectural manuals.
The transition toward connected workshop environments demands lifts that interface dynamically with shop management software and autonomous service diagnostics.
Real-time micro-sensors track hydraulic line viscosity, temperature changes, and column balance drift, alerting maintenance teams before seal failures or alignment issues occur.
Machine vision and laser sensors automatically align lift arms under standardized EV chassis jack points, avoiding high-voltage packs and speeding setup times.
High-efficiency fluid routing loops capture vehicle descent gravity to pre-pressurize recovery accumulator tanks, lowering energy consumption per lift cycle by up to 28%.
Detailed insights on layout planning, concrete specifications, and operational clearances.
For a standard 4.0-ton overhead lift, a minimum ceiling height of 3,750 mm to 3,950 mm is required. If your bay clearance is lower, our floor-plate (base-plate) lifts require only 2,850 mm of ceiling height, passing synchronization lines along the ground.
Standard 2-post lifts require a concrete slab thickness of at least 150 mm (6 inches) with a compressive strength of C20/25 (3,000 PSI), fully cured for 28 days. Heavy-duty 5.0T lifts handling commercial chassis or armored EVs require 200-250 mm reinforced concrete.
Yes, provided the front-to-rear weight balance matches the lift arm limits. Extended wheelbase vehicles often benefit from three-stage telescoping front and rear arms or a symmetrical setup to keep the vehicle center within safe post anchor margins.
Our dual-cylinder systems utilize aircraft-grade balance cables under high mechanical tension paired with individual hydraulic flow-restrictor velocity fuses to prevent unilateral arm drops in the event of hose pressure drop.
High-capacity vertical lifts, multi-level platforms, precision car turntables, and custom industrial manufacturing systems.
Cherish has always upheld the principle of "quality as the foundation," strictly controlling every step from raw material procurement to production to ensure that product quality meets international leading standards. We have obtained multiple international certifications, including ISO9001 Quality Management System Certification and CE Certification, and our products are exported to many countries and regions worldwide.
We understand that excellent service is the cornerstone of business growth. Cherish has established a comprehensive pre-sales, in-sales, and after-sales service system, providing customers with full technical support and service guarantees. Our experienced service team is available 24/7 to respond to customer needs, ensuring a worry-free experience for our clients.